How To Change Battery On Adt Motion Sensor
How To Change Battery On Adt Motion Sensor. Take the cover off of your sensor. This allows you to replace them before that critical moment when they are most needed.
Don't forget to take the alarm out of test mode! Locate the old battery or batteries. Then proceed to step 5.
Your Battery Is Now Replaced.
How to change your battery: Don't forget to take the alarm out of test mode! To replace the batteries get yourself a screwdriver and one or two batteries depending upon which model you’re using.
5 ‐ Go To Your Alarm System Keypad To Make Sure That It No Longer Displays A Bat Or Lo Battery Message.
Pry out the old battery. Remove the faceplate from your motion detector by pulling it away from the base plate. Whenever the batteries are low you will see a low battery symbol next to your motion sensor icon in your adt app.
Then, Replace The Front Cover By Snapping It Into Place.
Learn how to easily change the battery in your adt dsc impassa carbon detector. This is a short video showing how to change the battery in a wireless motion detector. Pry out the old battery.
Always Exercise Caution When Interacting With Your Battery.
An arrow on the front of the contact points to where the tab is located. Remove the batteries from the sensor and wait at least 90 seconds. Replace battery, making sure you replace it with the correct cr123a battery and it’s inserted the correct way up
Learn How To Easily Change The Battery In Your Adt Motion Sensor.
Always exercise caution when interacting with your battery. To change the battery, first remove the screw in the motion detector. Remove the batteries from the sensor and wait at least 90.
Post a Comment for "How To Change Battery On Adt Motion Sensor"