How To Replace O2 Sensor On 2002 Honda Civic
How To Replace O2 Sensor On 2002 Honda Civic. I have replaced the cat. Hold the harness carefully so it does not get twisted as you tighten the o2 sensor into place.
Hold the harness carefully so it does not get twisted as you tighten the o2 sensor into place. If this happens, use wire cutters to cut harness off of the sensor. Check if this fits your 2002 honda accord.
Unclip The Connector And Remove The Old O2 Sensor Assembly.
Hold the harness carefully so it does not get twisted as you tighten the o2 sensor into place. Every 30,000 to 50,000 miles (48,000 to 80,000 km). Oxygen sensor replacement service how much does a oxygen sensor replacement cost?
Simply Twist To Remove Sensor.
Look for a part that looks like a spark plug with a thick, black cable coming out of it. It will be on the exhaust pipe leading from the motor toward the back of the vehicle. Unheated oxygen sensors (1976 to early 1990 models):
Then Take Your New O2 Sensor And Place It Into The Socket.
Check your oxygen sensors regularly. Turn it until the o2 sensor is all the way out. Afterwards, use a regular 7/8 socket and large breaker bar to break the sensor free.
Check If This Fits Your 2002 Honda Accord.
Not to be confused with the air/fuel ratio sensor (bank 1 sensor 2. If so, than there is a problem with the heater element circuit of the heated oxygen sensor.water getting inside the heated oxygen sensor connector can caused the heated oxygen sensor fuse to blow. An oxygen sensor that is between the catalytic converter and the engine is known as an “upstream” sensor.
Lift The Locking Tab And Pull The Adapters Apart.
Pick up the o2 sensor by the harness; Location of primary o2 sensor (ho2s1). Here is how to change the o2 sensor (bank 1 sensor 2 downstream sensor) on a honda civic.
Post a Comment for "How To Replace O2 Sensor On 2002 Honda Civic"