Fuel It Flex Fuel Sensor
Fuel It Flex Fuel Sensor. For an immediate response the location of the sensor is chosen as close to the injector as possible. Genuine gm ethanol sensor part #13577429.
Genuine gm ethanol sensor part #13577379 (short) genuine gm ethanol sensor part #13577394 (long) *note: We do not feel that this product alters or changes the emissions systems on the car but due to the california regulations we cannot currently ship to that state. This allows consistent sampling of real fuel to pass through the sensor for accurate reading of the fuel.
As Ethanol Is Less Energy Dense, But Also Has A Higher Equivalent Octane Rating, Adjustments To The Fuel Load And Ignition Timing Are Required.
Flexible fuel vehicle can use up to 85% ethanol in most cases. Browse by brand, vehicle type & more hide filters show filters. This clever little device measures the alcohol content of the fuel.
This Is Also Displayed Directly On Your Can Gauge Or Can Display.
This allows consistent sampling of real fuel to pass through the sensor for accurate reading of the fuel. A flex fuel sensor is installed in the feed or return fuel lines and a signal wire is used as an input on the speeduino board. The fueltech flex fuel sensor is the way in which to monitor and vary the ignition timing, fuel injection and boost level based off the ethanol content in the engine’s fuel.
On The Basis Of Sensor Data, The Control Unit Automatically Switches To Gasoline Drive To Guarantee A Reliable And Convenient Start.
Gm continetal flex fuel sensor se1003. Because ethanol is difficult to ignite at temperatures below 13 °c, vehicles with the flex fuel system have a small auxiliary fuel tank onboard. It works equally well with methanol and/or ethanol.
For An Immediate Response The Location Of The Sensor Is Chosen As Close To The Injector As Possible.
I reached out to the company, and didn't get a straight answer on the specific sensor we should get for. This is a genuine gm / continental ethanol content sensor, in a newer smaller version without. The three wires provide a ground circuit, a power source, and a signal output to the ecm.
If You Had Half A Tank Of Gasoline And You Topped The Tank Up With 100% Ethanol Then Mixed It All Around, You Would End Up With A Mixture Of 50% Ethanol/50% Gasoline.
The sensor determines the ethanol content of the fluent fuel before it is injected. Flex fuel sensor other sensors/switches (knock, clutch switches, flex fuel, boost control solenoids) description. With efi however we can use a flex fuel sensor which, when installed into the fuel line, can measure the actual percentage content of ethanol in the fuel.
Post a Comment for "Fuel It Flex Fuel Sensor"